DC or AC Supplied Electronic Control Gear for LED Modules



Products

Lamp Control-gear For LED Module


Standard

IS 15885
(P-2/S-13)


Main Tests

  1. Cap Temperature Rise Test
  2. Interchangeability Testing
  3. Torsion Testing
  4. Vibration Testing
  5. Mechanical Strength Testing
  6. Resistance to heat fire and Tracking.
  7. Fault Condition Testing
  8. Thermal Endurance for Ballast

Self-Ballasted LED Lamps for General Lighting Services



Products

LED LAMPS/Bulbs


Standard

IS 15885
(P-2/S-13)


Main Tests

  1. Cap Temperature Rise Test
  2. Interchangeability Testing
  3. Torsion Testing
  4. Vibration Testing
  5. Mechanical Strength Testing
  6. Resistance to heat fire and Tracking.
  7. Fault Condition Testing
  8. Thermal Endurance for Ballast

GENERAL PURPOSE LUMINAIRES



Products

General Purpose Luminaires


Standard

IS 15885
(P-2/S-13)


Main Tests

  1. Cap Temperature Rise Test
  2. Interchangeability Testing
  3. Torsion Testing
  4. Vibration Testing
  5. Mechanical Strength Testing
  6. Resistance to heat fire and Tracking.
  7. Fault Condition Testing
  8. Thermal Endurance for Ballast

STREET LIGHTS



Products

Street Lights


Standard

IS 15885
(P-2/S-13)


Main Tests

  1. Cap Temperature Rise Test
  2. Interchangeability Testing
  3. Torsion Testing
  4. Vibration Testing
  5. Mechanical Strength Testing
  6. Resistance to heat fire and Tracking.
  7. Fault Condition Testing
  8. Thermal Endurance for Ballast

FANCY LIGHT



Products

Fancy Light


Standard

IS 15885
(P-2/S-13)


Main Tests

  1. Cap Temperature Rise Test
  2. Interchangeability Testing
  3. Torsion Testing
  4. Vibration Testing
  5. Mechanical Strength Testing
  6. Resistance to heat fire and Tracking.
  7. Fault Condition Testing
  8. Thermal Endurance for Ballast

Accurate Test Solution offers you luminaries LED product testing that is one of the most vital testing processes done to check quality, accuracy, safety and life of products before delivering them in market to end-users. Whether you are looking for Luminaries LED product testing or any kind of other product testing, you will get complete solutions from ATS Lab – complies of the need of ISO 17025 and accredited by NABL in Electronic and Electrical disciplines. ATS Lab has testing facility for Luminaries, LED Bulb, LED Drivers, Batteries and Cells in electrical discipline. We follow international quality standards for luminaries LED product testing that include IS 10322 (P-5/S-1):2012 for Luminaries Part 5 like Particular Requirements Section- 1 Fixed General Purpose Luminaries. Our team of expert focus on three main tests to complete luminaries LED product testing that is:

 

Destructive Test – It is done to check the extent to which the product can be physically damaged when placed and carried out under drop test, free-fall and impact test.

 

Vibration Test – This test is done to conduct using Electro Dynamic Vibration Shaking System Testing with capacity up to 600Kgf, Freq. 0-3000 hz, Amplitude 0-38 mm, Mode sweep & octave, Acceleration 0-200 g with X/Y/Z axis direction.

 

Ingress Protection Test – It is done to determine the level of protection form water, dust and chemicals to verify lighting products’ acceptability. 

 

Feel free to contact us for luminaries LED product testing.